畢業設計_基于單片機的消毒衣柜控制器設計

1、編號： 畢業設計說明書題 目： 基于單片機的消毒衣柜 基于單片機的消毒衣柜 控制器設計 控制器設計 院 （系）： 電子工程與自動化學院 專 業： 測控技術與儀器 學生姓名： 勞家權 學 號： 0800820411 指導教師： 仲進安

2、 職 稱： 講師 題目類 題目類型： 型： 2012 年 05 月 10 日理論研究 實驗研究 工程設計 √工程技術研究 軟件開發桂林電子科技大學畢業設計（論文）報告用 第 2 頁AbstractTo design a SCM-based intelligent disinfection chest controller

3、. This design with 51 SCM as the primary chip, whose' hardware circuit consists of the sensor circuit, the key circuit, the controlled circuit, the LCD display circuit and the voice alarm circuit. The sensor circuit

4、was used to detect environmental parameters of the temperature and humidity, which consists of the temperature sensor and humidity sensor. The LCD display circuit and voice alarm circuit was used to convey the working st

5、atus information of the controller to the user .The key circuit can achieve the communication between the user and the controller. The main control object of the controlled circuit was the thermostat PTC thermistor heate

6、r and UV lamp. Disinfection chest through the heater heating and uv lamp illuminating, can achieve the dry and disinfection function.The controller not only can display the information of the daily time, the current envi

7、ronment temperature and humidity, the heating and disinfection time, but also has a variety of voice alarm function.220V AC supply to the thermostat PTC thermistor heater and UV lamp by the relay. SCM control the relay b

8、y means of detecting the temperature and humidity, setting time as well as setting key. The disinfection chest controller with the characteristics of simple structure and practical, as well as high performance SCM; sens